Customer Reviews

John

Just purchased my third knife strip. Amazing holding power, and they are made in USA!!! I could not be more happy with my purchases.

John

Just purchased my third knife strip. Amazing holding power, and they are made in USA!!! I could not be more happy with my purchases.

John

Just purchased my third knife strip. Amazing holding power, and they are made in USA!!! I could not be more happy with my purchases.

Ronald Johnson

I thought you and your team might appreciate my use of your products. My most recent purchase will be mounted on the sides of my kitchen prep station to hold my collection of high-end Japanese Chef's knives. I have however purchased numerous magnetic holders to support my extensive edged weapon collection. In the pic attached, each piece was acquired during overseas travels over a period of nearly 40 years. Some of these blades were custom made for me personally by weaponsmiths in Japan, Norway, Italy, Spain and Syria. Aside from the specimens held horizontally in racks, all blades pictured are held in place by your products. There are a total of 12 magnetic holders on this wall and some of the Germanic blades weigh as much as 7 pounds. In total, there are over 200 lbs of steel supported solely by magnets. The beauty, quality and function of your products is exceptional and the perfect compliment to the cypress walls of my home. There are plenty of cheap Chinese knockoffs on Amazon and there are ample non-wooden metal knife racks out there that may mar the blade finish. As a blade connoisseur, I entrust my collection only to Heirloom. Thanks for what you do!

Maverick M

We ordered this table and chairs last fall in 2024. I was hesitant to spend so much money sight unseen but Michael and the team were very reassuring and responsive throughout the process. I couldn't be more impressed with the quality and the beauty of the table and chairs. 10/10 - I will be recommending this table and Heirloom Products to my family and friends. If you are thinking of buying from them, just do it!

Tim Taylor

There were a few reviews that convinced me to go with this one, but it really is that good. Magnets go almost all the way to the edge, and there are very few dead spots around the screws. This is used daily throughout the day, and has been working extremely well for years. I've recommended this specific one to a few people. Our knives haven't had any damage from this, and the holder is still looking great. Well done! The pictured knife 2nd from the right is our heaviest, and is about 8oz/220g for reference. It stays put just fine. This could easily take heavier cutlery.

Mighty M. Mouse

Let me say at the outset that now, after I have "fixed" it, I would give it 10 stars! It's nearly perfect except just one thing. As you can see from the photos, the back of my kitchen counter has a 7/8 of an inch wide baseboard and I really needed to add another piece of wood behind the product to get the magnetic holder FURTHER AWAY FROM THE WALL. I purchased two boards of black walnut (on ebLay) of exactly the same 12 in. length as the product, except that one board was 1/2 in. thick and the other board was 3/4 in. thick and both boards were 2 in. wide, unlike the 1 3/4 in. width of the product. I hid the extra 1/4 in. by putting all of if at the bottom. I also purchased four screws, two 1/2 in. longer and two 3/4 in. longer because I didn't know which thickness of board I was going to use. I had to wait a week for the black walnut boards. It was easy enough to glue them and clamp them and finally extend the screw holes through the board. It seems the screws they supplied were too long because I ended up having to use the 1/2-in longer screws with the 3/4-in wider board. The 1/2-in wider board wasn't wide enough to comfortably grab the knives off of the magnetic board. I really felt it needed the full inch and a half of the two 3/4-in boards combined.

Mighty M. Mouse

Let me say at the outset that now, after I have "fixed" it, I would give it 10 stars! It's nearly perfect except just one thing. As you can see from the photos, the back of my kitchen counter has a 7/8 of an inch wide baseboard and I really needed to add another piece of wood behind the product to get the magnetic holder FURTHER AWAY FROM THE WALL. I purchased two boards of black walnut (on ebLay) of exactly the same 12 in. length as the product, except that one board was 1/2 in. thick and the other board was 3/4 in. thick and both boards were 2 in. wide, unlike the 1 3/4 in. width of the product. I hid the extra 1/4 in. by putting all of if at the bottom. I also purchased four screws, two 1/2 in. longer and two 3/4 in. longer because I didn't know which thickness of board I was going to use. I had to wait a week for the black walnut boards. It was easy enough to glue them and clamp them and finally extend the screw holes through the board. It seems the screws they supplied were too long because I ended up having to use the 1/2-in longer screws with the 3/4-in wider board. The 1/2-in wider board wasn't wide enough to comfortably grab the knives off of the magnetic board. I really felt it needed the full inch and a half of the two 3/4-in boards combined.

Nicole Smith

I needed this for my steak knives and it's perfect. I attached it to the side of my cabinet with double stick craft tape because the cabinet is a thin piece of wood and steak knives are light and it worked great. The magnet is perfect strength to hold tight but not feel like I'm going to bend my knife taking it off. Love it

LovinLife

Thus is one of the best purchases I’ve made! It is easy to install, blends in with the surrounding wood, and sticks to anything magnetic like crazy! As you see from the photo, it holds anything from a heavy Chinese cleaver to a bar spoon, & is great for tools in the last Mary room too. Just measure the right spot and get it, this is one of the tools you’ll have a lifetime (Made in USA)

LovinLife

Thus is one of the best purchases I’ve made! It is easy to install, blends in with the surrounding wood, and sticks to anything magnetic like crazy! As you see from the photo, it holds anything from a heavy Chinese cleaver to a bar spoon, & is great for tools in the last Mary room too. Just measure the right spot and get it, this is one of the tools you’ll have a lifetime (Made in USA)